Besen BS40 11 kW EV charger with app control and DLB
The Besen BS40 charges electric vehicles at up to 11 kW using a 16 A three-phase supply. Mobile app control and Dynamic Load Balancing (DLB) provide charging controls and management of the electrical system’s available power.
Controls and protection
The app gives access to device controls, while DLB manages the available electrical power for charging.
- Electrical protection: against undervoltage, current overload, short circuits and ground faults.
- Additional protection: against overheating and the effects of lightning strikes.
- Operating conditions: IP66 housing, temperatures from -25 °C to 55 °C and altitudes up to 2 000 m above sea level.
Mounting and consumption
The charger measures 230 × 350 × 95 mm and comes with a wall mount. An optional mounting post can also be used. Standby power consumption does not exceed 10 W.
| Manufacturer | Besen |
|---|---|
| Model | BS40-11KW-DLB-APP |
| Power | 11 kW |
| Rated current | 16 A |
| Number of phases | 3 |
| Supply voltage | AC 230/400 V |
| Frequency | 50/60 Hz |
| Protection rating | IP66 |
| Operating temperature | From -25 °C to 55 °C |
| Standby power consumption | ≤10 W |
| Maximum operating altitude | 2 000 m above sea level |
| Dimensions | 230 × 350 × 95 mm |
| Control | Via mobile app |
| Load management | Dynamic Load Balancing (DLB) |
| Protection features | Against undervoltage, current overload, short circuits, ground faults, overheating and the effects of lightning strikes |
| Mounting | Wall mount included; optional mounting post |
| EAN | 5905156108318 |
|---|
What power supply does the charger require?
It uses a three-phase AC 230/400 V supply at 50/60 Hz. The rated current is 16 A and charging power is up to 11 kW.
Is mounting hardware included?
A wall mount is included. A mounting post is an optional accessory.
Reviews
No reviews for this item yetOnly customers can leave a review, after buying the item.
Gudri pirkumi vienuviet
