Besen BS40-11KW-DLB+SOLAR 11 kW EV charger
The Besen BS40-11KW-DLB+SOLAR charges electric vehicles at up to 11 kW using a 16 A three-phase supply. It supports mobile app control, dynamic load balancing and solar charging.
Controls and power management
- Mobile app: provides access to charger controls.
- DLB: allows management of the electrical system’s available power.
- Solar charging: supports the use of solar energy for charging.
Enclosure and installation
The IP66-rated enclosure measures 230 × 350 × 95 mm. The charger operates at temperatures from -25 °C to 55 °C and at altitudes up to 2 000 m above sea level. Standby power consumption is no more than 10 W. A wall mount is included, while a mounting post is available as an optional accessory.
Protection features
The charger has Type A RCD protection plus 6 mA DC protection, along with protection against undervoltage, current overload, short circuits, ground faults, overheating and the effects of lightning strikes.
| Manufacturer | Besen |
|---|---|
| Model | BS40-11KW-DLB+SOLAR |
| Power | 11 kW |
| Rated current | 16 A |
| Number of phases | 3 |
| RCD | Type A + 6 mA DC |
| Supply voltage | AC 230/400 V |
| Frequency | 50/60 Hz |
| Protection rating | IP66 |
| Operating temperature | From -25 °C to 55 °C |
| Standby power consumption | ≤10 W |
| Maximum operating altitude | 2 000 m above sea level |
| Dimensions | 230 × 350 × 95 mm |
| Control | Via mobile app |
| Dynamic load balancing | DLB |
| Solar charging | Supported |
| Mounting | Wall mount included; mounting post available as an optional accessory |
| Protection features | Undervoltage, current overload, short circuit, ground fault, overheating and lightning strike effects |
What power supply does the charger require?
It uses a 16 A three-phase supply rated AC 230/400 V, 50/60 Hz. Charging power is up to 11 kW.
Is mounting hardware included?
A wall mount is included. A mounting post is available as an optional accessory.
Gudri pirkumi vienuviet
