Anycubic Photon Mono 4 Ultra resin 3D printer with 7" 10K screen
-2%
Delivery options to:
LithuaniaThe Anycubic Photon Mono 4 Ultra is a resin 3D printer for detailed models, figures and prototypes. Its 7-inch 10K monochrome screen and 17 × 17 µm X/Y resolution support fine structures.
Detail and printing speed
The screen has 9 024 × 5 120 pixels, with selectable layer heights from 0.02 to 0.15 mm. A COB light source, Fresnel lens and uniformity algorithm provide even exposure across the build area. With High Speed Resin 2.0, printing speeds reach up to 120 mm/h at a 0.1 mm layer height; standard resin supports up to 80 mm/h. The ACF release film supports a faster printing process.
Process monitoring and materials
- Monitoring: a 360° self-test, failed print detection, resin residue and level monitoring, plus release film condition and printer status monitoring.
- Resin options: supports high-speed, water-washable, standard, ABS-like and plant-based UV resins.
- Build plate: laser-engraved aluminium promotes adhesion of printed models.
- Odour filtration: an activated carbon filter absorbs odour molecules generated during printing.
The printer provides USB and Wi-Fi connectivity. Maximum power consumption is 66 W.
| USB | Yes |
|---|---|
| Build plate material | Aluminium |
| Layer height | 0.02–0.15 mm |
| Printing technology | Resin 3D printing |
| Build volume | 2 196 cm³ |
| Colour | Grey |
| Height | 43 cm |
| Weight | 5 kg |
| Width | 23.1 cm |
| Depth | 23.6 cm |
| Printable materials | Anycubic resins |
| Maximum power consumption | 66 W |
| Wi-Fi | Yes |
| Screen | 7-inch 10K monochrome screen, 9 024 × 5 120 pixels |
| X/Y resolution | 17 × 17 µm |
| Exposure system | COB light source, Fresnel lens and uniformity algorithm |
| Speed with High Speed Resin 2.0 | Up to 120 mm/h at a 0.1 mm layer height |
| Speed with standard resin | Up to 80 mm/h |
| Release film | ACF |
| Process monitoring | 360° self-test; failed print detection; resin residue and level monitoring; release film condition and printer status monitoring |
| Supported UV resin types | High-speed, water-washable, standard, ABS-like and plant-based |
| Activated carbon filter | 18 mm thick; weight 17 g; absorbs odour molecules |
| Build plate surface | Laser-engraved |
| EAN | 6974662351043 |
|---|
When can the printer reach up to 120 mm/h?
This speed is specified for High Speed Resin 2.0 at a layer height of 0.1 mm. With standard resin, the stated speed is up to 80 mm/h.
Does it support water-washable resin?
Yes. It supports water-washable UV resin, as well as high-speed, standard, ABS-like and plant-based UV resins.
Gudri pirkumi vienuviet
