be quiet! Shadow Rock LP low-profile CPU cooler, 130 W TDP
The be quiet! Shadow Rock LP is a low-profile CPU air cooler for compact SFF and HTPC cases. Its 75.4 mm height combines a space-saving layout with 130 W TDP cooling capacity.
Cooling and fan operation
Four 6 mm heat pipes transfer heat to the cooling fins. The 120 mm Pure Wings 2 PWM fan uses 9 airflow-optimised blades to reduce noise-causing turbulence. Noise at maximum speed is 25.5 dB(A).
- Fan: up to 1500 rpm, with a rifle bearing and a stated lifetime of 80 000 hours.
- Installation: the mounting system allows installation from the top of the motherboard.
- Finish: a brushed aluminium top cover and heat pipe caps.
System compatibility
Supported sockets are Intel 1200, 1150, 1151, 1155, 1156, 1366 and 2011(-3) Square ILM, plus AMD AM4, AM3(+), AM2(+), FM1 and FM2(+). Check both socket compatibility and case clearance against the cooler's dimensions of 122 × 134 × 75.4 mm.
| Maximum airflow | 48.96 CFM |
|---|---|
| Voltage | 12 V |
| Cooling fin count | 54 / 34 |
| Connection | 4 PIN |
| Fan diameter | 120 mm |
| Maximum fan speed | 1500 rpm |
| Maximum noise level | 25.5 dB |
| Heat pipe diameter | 6 mm |
| Rated current | 0.2 A |
| Heat pipe count | 4 |
| Fan count | 1 |
| Maximum air pressure | 1.25 mmH₂O |
| Cable length | 22 cm |
| Rated power consumption | 2.4 W |
| Material | Aluminium / copper |
| Depth | 122 mm |
| Weight | 0.39 kg |
| Colour | Black / silver |
| Height | 75.4 mm |
| Width | 134 mm |
| Type | Air cooling system |
| Cooler type | CPU cooler |
| TDP | 130 W |
| Fan model and control | Pure Wings 2, PWM |
| Fan blade count | 9 |
| Bearing type | Rifle bearing |
| Fan lifetime | 80 000 hours |
| Intel socket compatibility | 1200 / 1150 / 1151 / 1155 / 1156 / 1366 / 2011(-3) Square ILM |
| AMD socket compatibility | AM4 / AM3(+) / AM2(+) / FM1 / FM2(+) |
| Installation | From the top of the motherboard |
| Finish | Brushed aluminium top cover and heat pipe caps |
| EAN | 4260052184226 |
|---|
Will it fit a compact case?
The low-profile design is intended for systems including SFF and HTPC builds. It measures 75.4 mm high, 122 mm deep and 134 mm wide; compare these dimensions with the available clearance in your case.
How is the cooler installed?
The mounting system allows installation from the top of the motherboard. The fan has a 4 PIN connection and PWM control.
Gudri pirkumi vienuviet
