Network Cable Tester with PoE and Length Measurement
Multifunctional network cable tester designed for STP and UTP cable verification, cable length measurement, and PoE system diagnostics.
Key Features
- Cable continuity scanning for STP and UTP cables: detects open, short, and cross faults
- Cable length measurement from 2.5 m to 200 m with break location detection
- PoE testing (DC 5–60V) with voltage, polarity, power mode, and PSE type (IEEE 802.3af/at) identification
- Port flash function to easily locate connected network ports on switches or routers
- Integrated NCV detector in the receiver unit
- Backlit 128x64 dot-matrix LCD display for low-light visibility
| Compatible cable types | CAT5e / CAT6a / CAT6 (STP + UTP) |
|---|---|
| Max range (wiremap and scan) | 600m |
| Cable length test range | 2.5 m ~ 200 m |
| Cable length accuracy | +/- 1.6m |
| PoE test range | DC 5-60V standard / non-standard PoE switch |
| Supported PSE types | IEEE802.3af / IEEE802.3at; non-standard |
| Scan frequency | 130KHz |
| Display | 128x64 dot-matrix LCD with backlight |
| Voltage protection | DC 48V 5mA |
| Power supply | 1x 6R22 9V battery and 3x AAA batteries (not included) |
| EAN | 6971278906674 |
|---|
What cable length range can this device measure?
It can measure LAN cable lengths ranging from 2.5 m to 200 m with an accuracy of +/- 1.6 m.
What type of batteries does the tester require?
The tester requires one 9V (6R22) battery and three AAA batteries (batteries are not included).
Reviews
No reviews for this item yetOnly customers can leave a review, after buying the item.
Gudri pirkumi vienuviet
